Post by tiresmoke on May 10, 2009 7:45:58 GMT -5
Hey gang, Tiresmoke here......
This is my 1985 Z/28 Camaro, an on-going project.
This is a shot of the "Mighty Mouse" 315 that powers this thing...and from the looks of it, was snapped just before pulling the old HEI distributor and intake to clean, re-seal, and install the new Big End Pro-Comp billet distributor(available at ProMax)....I'll see if I can't find a picture of it to post up.
here's the lowdown:
315 cu. in. small-block Chevrolet(.060-over 305....don't ask, it was there when I bought it and has surprised more than one unsuspecting soul)
Edelbrock Performer RPM intake
Edelbrock Performer RPM camshaft(.488 int., .510 exh.)
Edelbrock valvesprings and push rods
Edelbrock Accu-Drive gear drive(think Vic made some $$$ on this deal?!)
Edelbrock T.E.S. headers
Edelbrock Performer carb and air cleaner(looking to ditch the carb and step up to a 750 DP Holley when funds allow)
Big End fuel pressure regulator9will install when I have the 750, no mount brackets available for the Edelbrock carb)
MSD StreetFire CD ignition box
MSD StreetFire plug wires
Big End Pro Comp Billet Distributor
Big End "tall" aluminum valve covers(for the impending 1.6 roller rockers)
TH350 transmission
stock rear end
Not gonna threaten the Pro Stock guys anytime soon with this thing in its current guise, but having some fun and laying the groundwork for bigger and better things!
A HUGE amount of thanks goes to Ben and Richard of ProMax for some screamin' deals on parts, as well as some sound advice.....I highly recommend them to anyone!
This is my 1985 Z/28 Camaro, an on-going project.
This is a shot of the "Mighty Mouse" 315 that powers this thing...and from the looks of it, was snapped just before pulling the old HEI distributor and intake to clean, re-seal, and install the new Big End Pro-Comp billet distributor(available at ProMax)....I'll see if I can't find a picture of it to post up.
here's the lowdown:
315 cu. in. small-block Chevrolet(.060-over 305....don't ask, it was there when I bought it and has surprised more than one unsuspecting soul)
Edelbrock Performer RPM intake
Edelbrock Performer RPM camshaft(.488 int., .510 exh.)
Edelbrock valvesprings and push rods
Edelbrock Accu-Drive gear drive(think Vic made some $$$ on this deal?!)
Edelbrock T.E.S. headers
Edelbrock Performer carb and air cleaner(looking to ditch the carb and step up to a 750 DP Holley when funds allow)
Big End fuel pressure regulator9will install when I have the 750, no mount brackets available for the Edelbrock carb)
MSD StreetFire CD ignition box
MSD StreetFire plug wires
Big End Pro Comp Billet Distributor
Big End "tall" aluminum valve covers(for the impending 1.6 roller rockers)
TH350 transmission
stock rear end
Not gonna threaten the Pro Stock guys anytime soon with this thing in its current guise, but having some fun and laying the groundwork for bigger and better things!
A HUGE amount of thanks goes to Ben and Richard of ProMax for some screamin' deals on parts, as well as some sound advice.....I highly recommend them to anyone!