bones
New Member
Posts: 2
|
Post by bones on May 10, 2009 16:16:28 GMT -5
hello, I have a Promax 4150, 1050 cfm 3 circuit carb I trying to tune, not ever played with a 3 circuit carb before, how do you make adjustments for the idle circuit and the intermediate circuit?
thanks
|
|
|
Post by ProMax on May 13, 2009 20:59:53 GMT -5
The intermediate curcuit has a pick-up and restrictor on each side of the metering block. The fuel bowl side acts just like a jet. On the idle curcuit there is a restrictor for it as well (larger size hole = richer idle curcuit). I hope this makes sense and helps out.
Thanks
Ben J. Gorman
PROMAX Performance 30 Gasoline Alley Suite A INDPLS, IN 46222 Phone: 317-484-1451
|
|
bones
New Member
Posts: 2
|
Post by bones on May 14, 2009 7:18:11 GMT -5
thanks Ben, on the fuel side...working from the main jets out, next would be the intermediate, then idle ?
and the air bleeds in the main body...upper one intermediate lower one idle?
|
|